ipv6 dhcp relay pd-route-injection

Use this command to enable the Route Injection of the delegated prefixes in DHCPClosed Dynamic Host Configuration Protocol Relay.

Use the no form of this command to disable Route Injection.

Command Syntax

Copy 
ipv6 dhcp relay pd-route-injection
no ipv6 dhcp relay pd-route-injection

Parameters

None

Default

By default this feature is disabled.

Command Mode

Configure mode

VRFClosed Virtual Routing and Forwarding mode

Applicability

This command was introduced in OcNOS version 4.2.

Examples

Copy 
#configure terminal
(config)# ip vrf vrf1
(config-vrf)# ipv6 dhcp relay pd-route-injection
 
#configure terminal
(config)#ipv6 dhcp relay pd-route-injection