ip dhcp snooping arp-inspection bridge
Use this command to enable/disable arp-inspection on the bridge.
-
You must enable dhcp snooping before enabling ARP inspection.
-
This command enables both the DHCPv4 and DHCPv6 functionality.
Command Syntax
Copy
ip dhcp snooping arp-inspection bridge <1-32>
no ip dhcp snooping arp-inspection bridge <1-32>Parameter
<1-32>
Bridge number
Default
None
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 5.0.
Example
Copy
#configure terminal
(config)#bridge 1 protocol mstp
(config)#ip dhcp snooping bridge 1
(config)#ip dhcp snooping arp-inspection bridge 1