Use this command to configure a RADIUS server for both accounting and authentication.
Use the no form of this command to remove a RADIUS server.
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>)
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>) timeout <1-60>
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>)(acct-port <0-65535> |) | timeout <1-60> |)
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>)(|(auth-port <0-65535> (|(acct-port <0-65535> (|(timeout <1-60>))))))
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) seq-num (<1-8>)(|(key ((0 WORD) | (7 WORD)) (|(auth-port <0-65535> (|(acctport <0-65535> (|(timeout <1-60>))))))))
no radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) (seq-num (<1-8>)|)
no radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) (seq-num (<1-8>)|) timeoutlogin
Remote login
A.B.C.D
IPv4 address of RADIUS server
X:X::X:X
IPv6 address of RADIUS server
HOSTNAME
DNS host name of RADIUS server
seq-num
seq-num Sequence Number / Priority index for radius-servers
<1-8>
sequence number for servers
timeout
How long to wait for a response from the RADIUS server before declaring a timeout failure
<1-60>
Range of time out period in seconds
vrf
Virtual Routing and Forwarding
management
Management VRF
None
Configure mode
This command was introduced before OcNOS version 1.3.
#configure terminal
(config)#radius-server login host 203.0.113.15 vrf management seq-num 1