show ip protocols rip

Use this command to display RIP process parameters and statistics.

Command Syntax

Copy

show ip protocols
show ip protocols rip

Parameters

None

Default

None

Command Mode

Exec mode and Privileged Exec mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

This is an example of the output from the show ip protocols rip command:

Copy

#show ip protocols rip
Routing Protocol is "rip" 
Sending updates every 30 seconds with +/-50%, next due in 12 seconds 
Timeout after 180 seconds, garbage collect after 120 seconds 
Outgoing update filter list for all interface is not set 
Incoming update filter list for all interface is not set 
Default redistribution metric is 1 
Redistributing: connected static 
Default version control: send version 2, receive version 2 
Interface        Send  Recv   Key-chain 
     eth0                 2   2 
Routing for Networks: 
  10.10.0.0/24 
Routing Information Sources: 
  Gateway          BadPackets BadRoutes  Distance Last Update 
Distance: (default is 120)
#

Table 99 Explains the show command output details.

Table 99. Show ip protocols output details

Field	Description
Routing Protocol is "rip"	Specifies the routing protocol used.
Sending updates every 30 seconds	Specifies the time between sending updates.
Next due in 12 seconds	Precisely when the next update is due to be sent.
Timeout after 180 seconds	Specifies the value of the timeout parameter.
Redistributing	Lists the protocol that is being redistributed.
Routing for Networks	Specifies the networks for which the routing process is currently injecting routes.
Routing Information Sources	Lists all the routing sources the IP Infusion software is using to build its routing table.