secondary elsp-signaled

Use this command to configure a secondary Diff-Serv (Differentiated Services) explicitly signaled E-LSP (EXP-Inferred-PSC LSP) interface. The classes 1 to 7 are optional parameters can be selected from the node level PHB-EXP (Per-Hop Behavior) mapping as PHBs. They will then be used for an E-LSP. If you do not specify a class with this command, all classes will be selected for the E-LSP.

Use the no parameter with this command to remove the configuration.

Command Syntax

Copy

secondary elsp-signaled
secondary elsp-signaled CLASS1
secondary elsp-signaled CLASS1 CLASS2 
secondary elsp-signaled CLASS1 CLASS2 CLASS3
secondary elsp-signaled  CLASS1 CLASS2 CLASS3 CLASS4
secondary elsp-signaled  CLASS1 CLASS2 CLASS3 CLASS4 CLASS5
secondary elsp-signaled CLASS1 CLASS2 CLASS3 CLASS4 CLASS5 CLASS6
secondary elsp-signaled CLASS1 CLASS2 CLASS3 CLASS4 CLASS5 CLASS6 CLASS7
no secondary elsp-signaled

Parameters

CLASS<0-7>

Diffserv class alias. e.g: be, ef, af11, etc.

Default

By default, secondary elsp signaled is disabled

Command Mode

Trunk mode

Applicability

This command was introduced before OcNOS version 1.3.

Examples

Copy

#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#secondary elsp-signaled class cs3 cs6 cs2 cs5
 
(config)#rsvp-trunk T1
(config-trunk)#no secondary elsp-signaled