hardware-profile filter evpn-mpls-cw

This hardware filter needs to be enabled, to allow configuring EVPN-MPLS with control-word functionality per EVI. Filter cannot be disabled if "EVPN-MPLS" is globally enabled.

Before enabling EVPN MPLS per-evi control-word (evpn mpls id command), give this command.

Before disabling the hardware-profile, disable EVPN MPLS globally (no evpn mpls enable).

You need to save the configuration and do a reboot after giving this command.

Use the disable form of this command to disable the configured hardware-profile.

Command Syntax

Copy

hardware-profile filter evpn-mpls-cw enable
hardware-profile filter evpn-mpls-cw disable

Parameters

None

Default

By default, EVPN MPLS control-word hardware-profile is disabled.

Command Mode

Configure mode

Applicability

This command was introduced in OcNOS version 6.1.0.

Example

Copy

#configure terminal
(config)# hardware-profile filter evpn-mpls-cw enable
(config)# hardware-profile filter evpn-mpls-cw disable