show ldp inter-area-fecs prefix
Use this command to show all LDP inter-area FECs by prefix.
Use parameter count to show FEC count for each prefix.
Command Syntax
Copy
show ldp inter-area-fecs prefix (A.B.C.D/M|X:X::X:X/M) countParameter
A.B.C.D/M
IP prefix <network>/<length>, e.g., 35.0.0.0/8
X:X::X:X/M
IPv6 prefix <network>/<length>, e.g., 3ffe::/16
count
Count of FECs
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 4.1.
Examples
Copy
#show ldp inter-area-fecs prefix 4.4.4.0/30
LSR codes : E/N - LSR is egress/non-egress for this FEC,
L - LSR received a label for this FEC,
> - LSR will use this route for the FEC
FEC Code Session Out Label ELC Nexthop Addr
Matching RIB prefix - 4.4.4.0/30
4.4.4.1/32 NL> 1.1.1.1 24970 No 12.1.1.1
NL> 3.3.3.3 24329 No 23.1.1.2
4.4.4.2/32 NL> 1.1.1.1 24971 No 12.1.1.1
NL> 3.3.3.3 24330 No 23.1.1.2
4.4.4.3/32 NL> 1.1.1.1 24972 No 12.1.1.1
NL> 3.3.3.3 24331 No 23.1.1.2
#show ldp inter-area-fecs prefix 4.4.4.0/30 count
Matching RIB prefix - 4.4.4.0/30
------------------------
Num. IPv4 FEC(s): 3
------------------------
#show ldp inter-area-fecs prefix 3ffe::/16
LSR codes : E/N - LSR is egress/non-egress for this FEC,
L - LSR received a label for this FEC,
> - LSR will use this route for the FEC
FEC Code Session Out Label ELC Nexthop Addr
#show ldp inter-area-fecs prefix 3ffe::/16 count