show mpls ldp neighbor

Use this command to display LDP neighbor information.

Command Syntax

Copy

show mpls ldp neighbor
show mpls ldp neighbor detail

Parameter

detail

Details for adjacencies.

Command Mode

Exec mode and Privileged Exec mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

Copy

#show mpls ldp neighbor detail
IP Address    Interface Name        Holdtime    LDP ID
192.168.3.5    eth1        15    10.10.0.18:0
192.168.4.5    eth2        15    10.10.0.18:0

Table 64 explains the show command output fields.

Table 64.
show mpls ldp neighbor output fields
Field	Description
IP Address	Address of the interface.
Interface Name	Name of the interface.
Holdtime	The amount of time this device waits between SPFs.
LDP ID	Local label space ID. The first four bytes of an LDP ID is a platform IP address called the LDP router ID. The last two bytes are called the local label space ID.