link-loss forwarding

Use this command to configure the link-loss forwarding on an access-interface.

Use the no parameter to un-configure the load interval globally.

Command Syntax

Copy 
llf-enable
no llf-enable

Parameters

None

Default

None

Command Mode

Access-if mode

Applicability

This command was introduced in OcNOS version 6.6.0.

Example

Copy 
#configure terminal
(config)#int xe22.2 sw
(config-if)#encapsulation dot1q 10
(config-if)#access-if-evpn
(config-acc-if-evpn)#llf-enable