mac-withdrawal flush-on-vpws-vc-switchover
Use this command to send MAC withdraw when the secondary spoke becomes the primary and primary becomes active due to vc mode revertive.
Use no parameter of this command to remove MAC withdraw when the secondary spoke becomes the primary.
Command Syntax
Copy
mac-withdrawal flush-on-vpws-vc-switchover Copy
no mac-withdrawal flush-on-vpws-vc-switchoverParameters
None
Default
None
Command Mode
MPLS Mode
Applicability
Introduced in OcNOS version 6.6.1.
Example
The following example is for
Copy
(config)#interface xe26.1222 switchport
(config-if)#encapsulation dot1q 222
(config-if)#access-if-vpws
(config-acc-if-vpws)#mpls-l2-circuit vc-2222 primary
(config-acc-if-vpws)#mpls-l2-circuit vc-2223 secondary
(config-acc-if-vpws)#vc-mode revertive
(config-acc-if-vpws)#mac-withdrawal flush-on-vpws-vc-switchover
(config-acc-if-vpws)#