message-ack
Use this command to enable message acknowledgment for all messages being sent to neighbors that are known to support refresh reduction.
Use the no parameter with this command to disable message acknowledgment for all messages being sent to neighbors.
Command Syntax
Copy
message-ack
no message-ackParameters
None
Default
By default, message acknowledgment is disabled
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
Copy
#configure terminal
(config)#router rsvp
(config-router)#message-ack
(config)#router rsvp
(config-router)#no message-ack