mpls propagate-ttl

Use this command to enable TTL propagation. Enabling TTL propagation causes the TTL value in the IP header to be copied onto the TTL field in the shim header, at the LSP ingress.

Use the no parameter with this command to disable TTL propagation.

Command Syntax

Copy

mpls propagate-ttl
no mpls propagate-ttl

Parameters

None

Default

Disabled.

Command Mode

Configure mode

Applicability

This command was introduced before OcNOS version 1.3.

Examples

Copy

#configure terminal
(config)#mpls propagate-ttl
 
#configure terminal
(config)#no mpls propagate-ttl