primary fast-reroute node-protection

Use this command to set node protection.

This command helps identify attributes of the FRR backup LSP for the one-to-one protection method.

Use the no parameter with this command to remove node protection.

Command Syntax

Copy 
primary fast-reroute node-protection
no primary fast-reroute node-protection

Parameters

None

Default

By default, primary fast reroute node protection is disabled.

Command Mode

Trunk mode

Applicability

This command was introduced before OcNOS version 1.3.

Examples

Copy 
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary fast-reroute node-protection