secondary-priority hop-limit

Use this command to specify a limit of hops for a secondary-priority lsp.

Upon configuration of an arbitrary hop-limit, the hop-limit is compared with the number of hops configured in the path, if a path has been configured. If the number of hops in the path exceed the hop-limit configured, no path messages are sent out and any existing session is torn down.

Use the no parameter to revert to the default hop-limit value.

Command Syntax

Copy

secondary-priority <1-5> hop-limit <1-255>
no secondary-priority <1-5> hop-limit <1-255>

Parameters

<1-5>

Secondary Priority value.

<1-255>

The number of acceptable hops.

Default

By default, hop limit is 255.

Command Mode

Trunk mode

Applicability

This command was introduced before OcNOS version 1.3.

Examples

Copy

(config)# rsvp-trunk t1
(config-trunk)#secondary-priority 1 hop-limit 123
(config)# rsvp-trunk t1
(config-trunk)# no secondary-priority 1 hop-limit 123