split-horizon (service-template)

Use this command to configure split-horizon group for vpls attachment circuit.

Use the no form of this command to remove split-horizon group from vpls attachment circuit.

Command Syntax

Copy

split-horizon group (network | access1 | access2)
no split-horizon group

Parameters

network

Split-horizon group name network

access1

Split-horizon group name access1

access2

Split-horizon group name access2

Default

By default, split horizon is disabled.

Command Mode

Interface VPLS mode

Applicability

This command was introduced before OcNOS version 6.3.0 and applicable only on Qumran1 devices.

Examples

Copy

#configure terminal
(config)#interface xe1
(config-if)#switchport 
(config-if)#mpls-vpls vpls1 service-template vc1
(config-if-vpls)#split-horizon group access1
(config-if-vpls)#no split-horizon group