vpls-vc

Use this command add a spoke virtual circuit to VPLS domain.

Use the no parameter to remove this configuration.

Command Syntax

Copy 
vpls-vc NAME (ethernet|vlan|)
vpls-vc NAME (secondary NAME|) (ethernet|vlan|)
no vpls-vc NAME

Parameter

NAME

Enter a string that identifies the MPLS VC to add to the VPLS domain

secondary

Set the secondary spoke name

NAME

Enter a string that identifies the secondary spoke

ethernet

Identify the spoke type as Ethernet (default)

vlan

Identify the spoke type as VLAN.

TNLNAME

Specify the MPLS-TP tunnel-name.

Default

By default, vpls vc name is disabled.

Command Mode

VPLS mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

Copy 
#configure terminal
(config)#mpls vpls test 34
(config-vpls)#vpls-vc VC1
(config-vpls)#exit
(config)#exit