ip dhcp client request

Use this command to add an option to a DHCPClosed Dynamic Host Configuration Protocol request.

Use the no form of this command to remove an option from a DHCP request.

Command Syntax

Copy 
ip dhcp client request dns-nameserver
ip dhcp client request host-name
ip dhcp client request log-server
ip dhcp client request ntp-server
no ip dhcp client request dns-nameserver
no ip dhcp client request host-name
no ip dhcp client request log-server
no ip dhcp client request ntp-server

Parameters

dns-nameserver

List of DNS name servers (DHCP option 6)

host-name

Name of the client (DHCP option 12)

ntp-server

List of NTP servers (DHCP option 42)

log-server

List of log servers (DHCP option 7)

Default

By default, ip dhcp client request is enabled

Command Mode

Interface mode

Applicability

This command was introduced before OcNOS version 1.3.

Examples

Copy 
#configure terminal
(config)#interface eth0
(config-if)#ip dhcp client request ntp-server