ipv6 dhcp relay address

Use this command to set an IPv6 address of a DHCP server to which a DHCP relay agent forwards client requests.

Use the no form of this command to remove an IPv6 address of a DHCP server.

User must enable the IPv6 DHCP relay feature with the ipv6 dhcp relay (configure mode) command to configure server address.

Command Syntax

Copy

ipv6 dhcp relay address X:X::X:X
no ipv6 dhcp relay address X:X::X:X

Parameters

X:X::X:X

IPv6 address of the DHCP server

Default

None

Command Mode

Configure mode

VRF mode

Applicability

This command was introduced before OcNOS version 1.3 and was changed in OcNOS version 1.3.8.

Examples

Copy

#configure terminal
(config)#ip vrf vrf1
(config-vrf)#ipv6 dhcp relay address 2001:db8::7F
 
#configure terminal
(config)#ipv6 dhcp relay address 2001:db8::7F