show ipv6 interface brief

Use this command to display information about interfaces. To display information about a specific interface, include the interface name.

Command Syntax

Copy

show ipv6 interface brief
show ipv6 interface IFNAME brief

Parameters

IFNAME

Name of the interface.

Default

None

Command Mode

Execution mode and Privileged execution mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

Copy

#show ipv6 interface brief
Interface           IPv6-Address                 Admin-Status
lo                  ::1                          [up/up]
 
gre0                unassigned                   [admin down/down]
 
eth3                3ffe:abcd:104::1             [up/up]
                    3ffe:abcd:103::1
                    fe80::2e0:29ff:fe6f:cf0
 
eth1                fe80::260:97ff:fe20:f257     [up/up]
 
eth2                unassigned                   [admin down/down]
 
eth3                unassigned                   [admin down/down]
 
sit0                unassigned                   [admin down/down]
 
tun24               unassigned                   [admin down/down]
 
tunl0               unassigned                   [admin down/down]

The table below explains the each interface brief entry.

Table 113.
show interface brief output details
Field	Description
Interface	Name of the interface.
IPv6-Address	IPv6 address. An asterisk (“*”) means the address was assigned by the DHCPv6 client.
Admin-Status	Status of the interface: The first part of the field indicates if the interface is up. The second part indicates if the interface is running.