ip sla schedule
Use this command to schedule an IP SLA operation by associating a Time Range Commands object with the IP SLA operation.
Use the no form of this command to stop the configured IP SLA measurement.
Command Syntax
Copy
ip sla schedule <1-65535> time-range WORD (vrf (NAME)|)Parameters
<1-65535>
IP SLA identifier.
time-range
Time Range
TR_NAME
Time range name that you set with theTime Range Commands command.
vrf
VPN Routing/Forwarding instance
NAME
VPN Routing/Forwarding instance name. Maximum limit 32 characters
Default
None
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
Copy
#configure terminal
(config)#ip sla schedule 1 time-range t1 vrf v1