ip-flow-monitor

Use this command to create an IP flow monitor profile, defining parameters and settings for monitoring network flows.

Use no parameter of this command to remove an existing IP flow monitor profile from the configuration.

Command Syntax

Copy

ip-flow-monitor <WORD>
no ip-flow-monitor <WORD>

Parameters

ip-flow-monitor <WORD>

Specifies the name of the flow monitor profile, which must be unique within the device and can contain up to 32 alphanumeric characters, hyphens, and underscores.

Default

None

Command Mode

Configure mode

Applicability

Introduced in OcNOS version 6.5.1.

Example

The following command configures an IP flow monitor profile named FLOW-MONITOR.

Copy

OcNOS#configure terminal
OcNOS(config)#ip-flow-monitor FLOW-MONITOR
OcNOS(ip-flow-monitor)#