arp access-list default

Use this command to modify the default rule action of an access list.

The default rule is applicable only when an access list is attached to an interface. The default rule will have the lowest priority and only ARP packets not matching any of the user defined rules match the default rule.

Command Syntax

default (deny-all|permit-all)

Parameters

deny-all

Drop all packets.

permit-all

Accept all packets.

Default

The default rule is deny-all when an access list is attached to an interface.

Command Mode

ARP access-list mode

Applicability

This command was introduced in OcNOS version 3.0.

Examples

#configure terminal

(config)#arp access-list arp1

(config-arp-acl)#default permit-all