feature telnet
Use this command to enable the telnet server.
Use the no form of this command to disable the telnet server.
Executing no form command closes the active telnet session.
Command Syntax
Copy
feature telnet (vrf management|)
no feature telnet (vrf management|)Parameters
management
Virtual Routing and Forwarding name
vrf management
Defines the management VRF
Virtual Routing and Forwarding instance.
vrf NAME
Specify the user-defined VRF instance name.
Default
None
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.Added VRF NAME parameter in OcNOS version 6.5.3.
Examples
Copy
#configure terminal
(config)#feature telnet vrf management