ipv6 dhcp server pool

Use this command to create a IPv6 DHCPClosed Dynamic Host Configuration Protocol server pool.

Use the no form of this command to delete a IPv6 DHCP server pool.

Command Syntax

Copy 
ipv6 dhcp server pool NAME
no ipv6 dhcp server pool NAME

Parameters

NAME

Name of the pool (maximum 63 alphanumeric characters)

Default

No default value is specified

Command Mode

Configure mode and VRFClosed Virtual Routing and Forwarding mode

Applicability

This command was introduced in OcNOS version 6.1.0.

Examples

Copy 
#configure terminal
(config)#ipv6 dhcp server pool test-pool
 
#configure terminal
(config)#ip vrf vrf1 
(config-vrf)#ipv6 dhcp server pool test-pool