ipv6 access-list resequence
Use this command to modify the sequence numbers of an IPv6 access list specification.
Use a non-overlapping sequence space for new sequence number sets to avoid possible unexpected rule matches during transition.
Re-sequencing an ACL attached to a management interface clears the ACL counters associated to it.
Command Syntax
Copy
resequence <1-268435453> INCREMENT
Parameter
<1-268435453>
Starting Sequence number.
INCREMENT
Sequence number increment steps.
Default
No default value is specified
Command Mode
IPv6 access-list mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
Copy
#configure terminal
(config)#ipv6 access-list mylist
(config-ipv6-acl)#resequence 15 15