notification enabled

When this command is enabled, NETCONF Notification and SNMP Trap are generated when the delay-measurement of the configured interface crosses the configured notification threshold or notification minimum-change.

For SNMP Traps to be generated, the global configuration snmp-server enable traps twamp must be configured.

Command Syntax

Parameters

None

Default

By default, this command is disabled.

When the notification enabled is configured, and the notification threshold or the notification minimum-change is not set, then the default values of the notification threshold and the notification minimum-change will be used to check if the average round-trip time delay has crossed the values.

Command Mode

Delay profile interface mode

Applicability

This command was introduced in OcNOS version 6.6.1

Example