notification minimum-change <0-10000>

When the average round-trip time delay varies more than the configured minimum-change in microseconds, then a NETCONF Notification and an SNMP Trap are generated to indicate that the minimum-change has been crossed.

Command Syntax

Copy

notification minimum-change <1-100>
no notification minimum-change

Parameters

<0-10000>

Set the advertisement minimum-change value (in microseconds)

Default

By default, the notification minimum-change is set to 1000 microseconds.

Command Mode

Delay profile interface mode

Applicability

This command was introduced in OcNOS version 6.6.1

Example

Copy

#configure terminal
(config-dp-intf)#delay-profile interfaces
(config-dp-intf)#notification minimum-change 420
(config-dp-intf)#no notification minimum-change