ntp trusted-key

Use this command to define a “trusted” authentication key. If a key is trusted, the device will synchronize with a system that specifies this key in its NTP packets.

Use the no option with this command to remove a trusted key.

Command Syntax

Copy 
ntp trusted-key <1-65534> (VRF(NAME|management)|)
no ntp trusted-key <1-65534> (VRF(NAME|management)|)

Parameter

<1-65534>

Authentication key number

vrf management

Defines the management VRFClosed Virtual Routing and Forwarding instance.

vrf NAME

Specify the user-defined VRF instance name.

Default

By default, ntp trusted key is disabled

Command Mode

Configure mode

Applicability

This command was introduced before OcNOS version 1.3. A Added VRF NAME parameter in OcNOS version 6.5.3.

Example

Copy 
#configure terminal
(config)#ntp trusted-key 234676 vrf management