rx-output amp-target

Use this command to configure the Rx output amplitude target override value.

Use the no form of this command to remove the Rx output amplitude target override value.

Command Syntax

Copy

rx-output amp-target <0-15>
no rx-output amp-target

Parameters

<1-15>

Output amplitude target value

Default

None

Command Mode

QSFP-DD mode and QSFP-DD host-lane mode

Applicability

This command was introduced before OcNOS version 6.5.1.

Example

Copy

#configure terminal
(config)#qsfp-dd 0
(config-qsfp-dd)#rx-output amp-target 0
(config-qsfp-dd)#commit
(config-qsfp-dd)#no rx-output amp-target
(config-qsfp-dd)#commit
(config-qsfp-dd)#host-lane 3
(config-qsfp-dd-host)#rx-output amp-target 1
(config-qsfp-dd-host)#commit
(config-qsfp-dd-host)#no rx-output amp-target
(config-qsfp-dd-host)#commit