show snmp host

Use this command to display the SNMP trap hosts.

Command Syntax

show snmp host

None

Execution mode

This command was introduced before OcNOS version 1.3.

#show snmp host

---------------------------------------------------------------------------

Host Port Version Level Type SecName

---------------------------------------------------------------------------

10.10.26.123 162 2c noauth trap test

Table 40 explains the output fields.

Table 40.
Show snmp host output
Entry	Description
Host	The IP address of the SNMP host server.
Port	The port being used for SNMP traffic.
Version	SNMP version number.
Level	The security level being used.
Type	The type of SNMP object being sent.
SecName	Secure Name for this SNMP session.