snmp-server enable snmp
Use this command to start the SNMP agent daemon over UDP
User Datagram Protocol.
Use the no form of this command to stop the SNMP agent daemon over UDP.
Command Syntax
Copy
snmp-server enable snmp (vrf (NAME|management)|)
no snmp-server enable snmp (vrf (NAME|management)|)Parameters
vrf management
Defines the management VRF Virtual Routing and Forwarding instance.
vrf NAME
Specify the user-defined VRF instance name.
Default
None
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3. Added VRF NAME parameter in OcNOS version 6.5.3.
Examples
Copy
#configure terminal
(config)#snmp-server enable snmp vrf management