Configuration
|
#configure terminal |
Enter Configure mode. |
|
(config)#feature software-watchdog |
Enable software watchdog for all OcNOS modules — This is the default. |
|
(config)#no software-watchdog imi |
To disable software watchdog for only imi modules. |
|
(config)#software-watchdog keep-alive-time 100 |
The keep-alive time interval in seconds. Default is 60 seconds and applies to all OcNOS modules. |
|
(config)#show software-watchdog status |
Display the keep-alive time interval and list of OcNOS process names with watchdog status for each OcNOS modules. |
|
(config)#commit |
Commit the candidate configuration to the running configuration |
|
(config)#exit |
Exit configuration |
Validation
Copy
#show software-watchdog status
Software Watchdog timeout in seconds : 100
Process name Watchdog status
============ ===============
nsm Enabled
ripd Enabled
ospfd Enabled
isisd Enabled
hostpd Enabled
ldpd Enabled
rsvpd Enabled
mribd Enabled
pimd Enabled
authd Enabled
mstpd Enabled
imi Disabled
onmd Enabled
HSL Enabled
oam Enabled
vlogd Enabled
vrrpd Enabled
ndd Enabled
ribd Enabled
bgpd Enabled
l2mribd Enabled
lagd Enabled
sflow Enabled