clock-accuracy
Use this command to indicate the expected accuracy of the clock.
Use the no parameter of this command in PTP Clock Mode and PTP Clock Port Mode to set the default value.
Applicable to Non-Ethernet ports for PTP Clock Port mode.
Command Syntax
Copy
clock-accuracy <0-255>
no clock-accuracyParameters
<0-255>
A number representing the expected clock accuracy.
Command Mode
PTP Clock Mode
PTP Clock Port Mode
Default
The default value for PTP Clock Mode is 254.
The default value for PTP Clock Port Mode is 0x21.
Applicability
This command was introduced in OcNOS version 3.0.
Example
Copy
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#clock-accuracy 10
(config-ptp-clk)#clock-port 1
(config-clk-port)#clock-accuracy 15