clock-class
Use this command to denote the traceability of the time or frequency distributed by the clock.
Use the no parameter of this command to set the default value.
Applicable to non-Ethernet ports for PTP Clock Port mode.
Command Syntax
Copy
clock-class <0-255>
no clock-classParameters
<0-255>
A number that indicates the traceability of the time or frequency of the clock.
Command Mode
PTP Clock Mode
PTP Clock Port Mode
Default
In PTP Clock Mode, the default value is 248, and in PTP Clock Port Mode, the default value is 6 for the clock-port.
Applicability
This command was introduced in OcNOS version 3.0.
Example
Copy
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#clock-class 3
(config-ptp-clk)#clock-port 1
(config-clk-port)#clock-class 7