show cpu-queue details
Use this command to display CPU queue details.
Command Syntax
Copy
show cpu-queue detailsParameters
None
Default
None
Command Mode
Execution mode and Privileged execution mode
Applicability
This command was introduced before
Example
Use the following command to configure rate/monitor/no-monitor for protocol queues:
Copy
OcNOS#show cpu-queue details
Can not configure the parameter
Cpu queue Rate In PPS Monitor Status Lossy Status
Name Configured Default Max Rate Allowed Configured Default Configured Default
=========== ========== ======= ================ =========== ========== =========== ==========
best-effort - 2113 2113 - * no-monitor - *lossy
ipmc-miss - 2113 2113 - * no-monitor - * lossy
l3-miss - 211 211 - * no-monitor - * lossy
sflow - 32000 100000 - monitor - * lossy
bgp - 1500 1500 - monitor - lossless
vrrp - 1024 1024 - monitor - lossless
rip - 500 500 - monitor - lossless
ospf - 2000 2000 - monitor - lossless
dhcp - 100 2048 - no-monitor - lossy
nd - 6000 6000 - monitor - lossless
pim - 4000 4000 - * no-monitor - * lossy
arp - 6000 6000 - monitor - lossless
igmp - 4000 4000 - * no-monitor - * lossy
bpdu - 10000 10000 - monitor - lossless
ccm - 1000 1000 - no-monitor - lossy
bfd - 2000 2000 - no-monitor - lossy
ptp - 1000 1000 - no-monitor - lossy
isis - 500 1000 - monitor - lossless
trill-isis - 1000 1000 - monitor - lossless
acl - 200 1000 - * no-monitor - * lossy
vxlan - 500 500 - monitor - lossy
daivm - 100 500 - no-monitor - lossy