ipv6 dhcp server rapid-commit

Use this command to enable the DHCP client to obtain configuration parameters from the server through a rapid two message exchange (solicit and reply).

Use the no form of this command to disable the IPv6 DHCP server rapid-commit option.

Command Syntax

Copy

ipv6 dhcp server rapid-commit
no ipv6 dhcp server rapid-commit

Parameters

None

Default

No default value is specified

Command Mode

Configure mode

VRF mode

Applicability

This command was introduced in OcNOS version 6.1.0.

Examples

Copy

#configure terminal
(config)#ipv6 dhcp server rapid-commit
 
#configure terminal
(config)#ip vrf vrf1 
(config-vrf)#ipv6 dhcp server rapid-commit