ntp master
Use this command to run a device as an NTP server.
Use the no command to disable the NTP server.
Command Syntax
Copy
ntp master ( VRF(NAME|management)|)
no ntp master (VRF (NAME|management)|)Parameters
vrf management
Defines the management VRF instance.
vrf NAME
Specify the user-defined VRF instance name.
Default
By default, NTP master is disabled
Command Mode
Configure mode
Applicability
This command is introduced in OcNOS version 4.1. Added VRF NAME parameter in OcNOS version 6.5.3
Example
Copy
#configure terminal
(config)#ntp master vrf management