radius-server login host key
Use this command to set per-server shared key (“shared secret”) which is a text string shared between the device and RADIUS servers.
Use the no form of this command to remove a server shared key.
Command Syntax
radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) (seq-num (<1-8>)|) (|(key ((0 WORD) | (7 WORD)) (|(auth-port <0-65535> (|(acct-port <0-65535> (|(timeout <1-60>))))))))
no radius-server login host (A.B.C.D | X:X::X:X | HOSTNAME) (vrf management|) (seq-num (<1-8>)|) (key ((0 WORD) | (7 WORD) ) (|(auth-port <0-65535> (|(acct-port (|(timeout)))))))Parameters
login
Remote login
A.B.C.D
IPv4 address of RADIUS server
X:X::X:X
IPv6 address of RADIUS server
HOSTNAME
DNS host name of RADIUS server
seq-num
seq-num Sequence Number / Priority index for radius-servers
<1-8>
sequence number for servers
0
Unencrypted (clear text) shared key
WORD
Unencrypted key value; maximum length 63 characters
7
Hidden shared key
WORD
Hidden key value; maximum length 63 characters
WORD
Unencrypted (clear text) shared key value; maximum length 63 characters
auth-port
UDP port to use for RADIUS accounting messages
<0-65535>
Range of UDP port numbers
acct-port
UDP port to use for RADIUS accounting messages
<0-65535>
Range of UDP port numbers
timeout
How long to wait for a response from the RADIUS server before declaring a timeout failure
<1-60>
Range of timeout period in seconds
vrf
Virtual Routing and Forwarding
management
Management VRF
Default
None
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#radius-server login host 203.0.113.15 vrf management seq-num 1 key 0 testing auth-port 23255