hardware-profile filter evpn-mpls-mh

Use this command to enable the hardware-profile for EVPN MPLS multihoming to successfully activate multi-homing in the hardware.

Before enabling EVPN MPLS multihoming (evpn mpls multihoming enable command), give this command.

Before disabling the hardware-profile, disable EVPN MPLS multihoming.

You need to save the configuration and do a reboot after giving this command.

Use the disable form of this command to disable the configured hardware-profile.

Command Syntax

Copy 
hardware-profile filter evpn-mpls-mh enable
hardware-profile filter evpn-mpls-mh disable

Parameters

None

Default

By default, EVPN MPLS multihoming hardware-profile is disabled.

Command Mode

Configure mode

Applicability

This command was introduced in OcNOS version 4.0.

Example

Copy 
#configure terminal
(config)# hardware-profile filter evpn-mpls-mh enable
(config)# hardware-profile filter evpn-mpls-mh disable