show ldp interface delayed-ftn-list
Use this command to display the list of Forwarding Equivalence Class (FEC) entries currently queued for delayed deletion by the delay-ftn-delete timer. This command helps operators verify pending FEC-to-Tunnel (FTN) deletions and monitor entries awaiting removal from the forwarding plane, minimizing traffic disruption during network convergence events.
If the RIB sends a route update/delete quickly (before the timer expires), the timer is stopped, and the FTN is deleted immediately. The "Running" status in the show command may only be visible if there is a delay in RIB processing or if SPF timers are increased for testing.
Command Syntax
show ldp interface delayed-ftn-list Parameter
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 7.0.1.
Examples
The following output displays a list of all interfaces on the LSR.
#show ldp interface delayed-ftn-list
Interface Status FEC
ce20 Not running -
ce21 Not running -
eth0 Not running -
ge0 Not running -
ge1 Not running -
ge2 Not running -
ge3 Not running -
lo Not running -
lo.management Not running -
xe4 Not running -
xe5 Not running -
xe6 Not running -
xe7 Not running -
xe8 Not running -
xe9 Not running -
xe10 Not running -
xe11 Not running -
xe12 Not running -
xe13 Not running -
xe14 Not running -
xe15 Not running -
xe16 Not running -
xe17 Not running -
xe18 Running (45s) 2.2.2.2/32
xe19 Not running