show mpls bandwidth-class
Use this command to view bandwidth class parameters: bandwidth class name; allocated bandwidth; setup hold priority
Command Syntax
Copy
show mpls bandwidth-classParameters
None
Command Mode
Execution mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
Copy
show mpls bandwidth-class
Bandwidth-class: BW_1
Bandwidth: 6k Setup-priority: 1 Class-type: 1The following table explains the show command output fields.
|
Field |
Description |
|
Bandwidth-class |
Bandwidth for each class type. |
|
Bandwidth |
Bandwidth configured for the active MPLS. |
|
Setup-Priority |
The setup priority is compared with other setup priorities for established sessions on the link to determine whether some of them should be preempted to accommodate the new session. Sessions with lower hold priorities are preempted. |
|
Class-type |
Bandwidth allocated for the specified class type. |